Load Cells

Product

1000

The compression load cell 1000 is precise and robust and it has been designed to meet the requirements of a wide range of industrial weighing applications: hoppers, tanks, platforms. The load cell 1000… 
EAC
Product

2000

The compression load cell 2000 is made of stainless steel and it has excellent characteristics of precision and robustness. Equipped with watertight protection, the 2000 load cell is resistant to the… 
EAC
Product

CC3

The CC3 Compression Load Cell has been designed to meet the requirements of a wide range of industrial weighing applications, it has excellent accuracy and robustness thanks to the stainless steel construction,… 
ATEX EAC
Product

60001

The tension load cell 60001 has been designed for the industrial weighing of small tanks and hoppers. The S-type load cell 60001 has excellent linearity and accuracy features and excellent overload resistance… 
EAC NTEP OIML
Product

60050

The tension and compression load cell 60050 (also known as traction or S-type load cell) has been designed for the industrial fiscal weighing of small tanks and hoppers. The traction load cell 60050 has… 
EAC NTEP OIML
Product

PSTR

The PSTR tension load cell is made of stainless steel and is ideal for tensile loads and suspended loads, for measuring tensile forces, for dynamometric measurements and as a load limiting device for… 
EAC
Product

65023

The 65023 shear beam load cell, made of nickel-plated steel and stainless steel, has watertight protection for use in harsh environmental conditions, excellent linearity and precision characteristics… 
EAC FM NTEP OIML
Product

65083

The 65083 shear beam load cell has been designed for the weighing of hoppers and tanks and for the construction of low profile platforms, it has excellent characteristics of linearity, precision and resistance… 
EAC FM NTEP OIML
Product

PSD800

The PSD800 shear beam load cell, made of stainless steel and hermetically sealed, is suitable for platforms, hoppers and pallets. The PSD800 shear beam load cell guarantees high precision up to 6000 divisions… 
ATEX EAC NTEP OIML
Product

DDR

The DDR double shear beam load cell made of stainless steel and with fully welded hermetic seal, is suitable for weighing tanks and silos and has a 12 m shielded 6-conductor cable for electrical connection.… 
ATEX EAC GOST OIML
Product

DSBZ

The double shear beam load cell DSBZ guarantees high precision and is insensitive to lateral loads. For this reason, it is suitable for heavy industrial weighing, such as trucks and large heavy vehicles.… 
EAC
Product

PRR

The PRR double shear beam load cell, made of stainless steel with watertight protection, has a low profile and is perfect for working in hostile environments and heavy industries, such as the steel industry.… 
EAC
Product

1320

The off center load cell 1320, made of aluminum, is ideal for large-scale single-cell platforms, dynamometers and weight controllers. This load cell maintains precision in any position the object is loaded… 
ATEX EAC FM NTEP OIML
Product

C2D1

The off center load cell C2D1 can be used in different sectors as it maintains precision even where the loads are not well centered and static, it is characterized by high accuracy and low pressure. The… 
EAC OIML
Product

C2G1

The Off Center C2G1 load cell is capable of weighing while maintaining high precision and maximum reliability even with off-center loads and is particularly suitable for the construction of industrial… 
EAC OIML
Product

ALPHA

The bending beam load cell ALPHA has excellent precision in small dimensions, is easy to install, has a high temperature range of use and is equipped with a shielded 4-conductor cable 1.5 meters long… 
EAC FM OIML
Product

BBF

The bending beam load cell BBF is welded and built in stainless steel, has a thermal seal and has been designed for weighing tanks, hoppers, belts, platforms, single-cell systems, suspended loads and… 
ATEX EAC OIML
Product

BBR

The bending beam load cell BBR is made of stainless steel, is completely welded and has a thermal seal. The cell BBR has been designed for weighing tanks, hoppers, belts, platforms, single-cell systems,… 
ATEX EAC OIML
Product

GIPE3000

The GIPE3000 pin load cell, made of stainless steel, is ideal where it is necessary to measure the lifting force. The pin load cells are usually mounted as pulley pins or inserted as integral parts of… 
EAC
Product

PSPRX

The PSPRX pin load cell is made of stainless steel and offers maximum resistance to impacts and overloads. The operation of the PSPRX load cell is double-ended shear beam. The PSPRX cell is insensitive… 
EAC
Product

C2G1 HT

The C2G1 HT load cell is suitable for high temperatures and it is particularly suitable for the construction of industrial and bench scales, piece counters and packaging machines. The C2G1 HT cell also… 
EAC OIML
Product

CMH HT

The CMH HT load cell, built in stainless steel, has been designed for the industrial weighing of silos, tanks, ladles etc. and it is ideal for working in harsh environments or where a high temperature… 
EAC
Product

CVS HT

The CVS HT cell, made of steel, has been designed for the measurement of forces and works both in tension and compression. It has excellent linearity and accuracy and withstands overloads of over 300%.… 
EAC
Product

PSRT

The PSRT toroidal annular load cell, made of stainless steel, is used to check the stringing of tie rods or bolts for rock or soil riveting. Furthermore, the toroidal annular cells show any release or… 
EAC
Product

CS20

The CS20 S-type (tension and compression) load cell has been designed for the industrial fiscal weighing of small tanks and hoppers, it has excellent characteristics of linearity and precision and an… 
ATEX EAC OIML
Product

CS30

The CS30 S-type load cell, made of stainless steel, has been designed for the industrial and fiscal weighing of small tanks and hoppers, it has excellent linearity and precision features and it has an… 
ATEX EAC OIML
Product

CVF

The universal CVF load cell is made of stainless steel and it has excellent linearity and precision characteristics, it has an overload resistance of over 300% and a watertight protection for use in harsh… 
EAC
Product

DSA-R

The BLH NOBEL DSA-R load cell is made of galvanized steel, it has a variable load capacity according to customers' needs and the temperature ranges from -40 ° C to + 150 ° C. It is also supplied with… 
EAC IECEx
Product

KIM-1

The BLH NOBEL KIM-1 load cell is extremely precise and robust, it is resistant to very high lateral forces, it has a moveable loading point and it is easy to install. The KIM-1 load cell is used in weighing… 
ATEX EAC IECEx
Product

KIMD-1

The BLH NOBEL KIMD-1 load cell is easy to install and it needs no additional mounting accessories. The KIMD-1 cell is suitable for weighing big loads and has a movable load point. The load cell BLH NOBEL… 
ATEX EAC IECEx
Product

1006

Model 1006 is a very low capacity, high precision single point load cell designed for direct mounting in low capacity scales. This load cell is suitable for applications including postal scales, counting… 
Product

1010/1015

The Model 1010 is a single-point load cell designed for direct mounting of low cost, low capacity weighing platforms. Its use in large platforms, combined with its high accuracy and low cost, makes this… 
FM NTEP
Product

1022

The Model 1022 is a low proile single-point load cell designed for direct mounting in low cost weighing platforms. Its small physical size, combined with high accuracy and aluminum construction, makes… 
ATEX FM IECEx NTEP OIML
Product

MKX ®

MKX is a mounting accessory invented by Pavone Systems, who developed this product thanks to his previous experience and know-how. This is an innovative mechanical system for mounting load cells for industrial… 
Product

MH MOUNTING KIT

MH MOUNTING KIT is an assembly accessory that is easy to assemble and ideal for weighing roller conveyors, platforms, hoppers and tanks. The height of MH MOUNTING KIT can be adjusted in order to obtain… 
Product

DE MOUNTING KIT

DE MOUNTING KIT, unique in its kind, represents an excellent solution for complex situations where precision and strength are required. It is ideal for weighing roller conveyors, platforms, hoppers and… 
Product

LEVERMOUNT

LEVERMOUNT is the most recent and innovative mechanical assembly system for load cells for industrial weighing systems. The LEVERMOUNT weighing module has a stainless steel shear beam load cell, a base… 
ATEX EAC OIML
Product

MASTERMOUNT

The MASTERMOUNT weighing module is an aesthetically appealing product; it has a double shear beam load cell made of stainless steel and a built-in mounting component. MASTERMOUNT is ideal for weighing… 
ATEX EAC
Product

PERMOUNTING

The PERMOUNTING weighing module has a pin load cell (double shear beam operation) made of fully welded steel and a built-in mounting component. The PERMOUNTING weighing module is suitable for tension… 
EAC