The bending beam load cell BBF is welded and built in stainless steel, has a thermal seal and has been designed for weighing tanks, hoppers, belts, platforms, single-cell systems, suspended loads and automatic packaging machines. The BBF cell is supplied with a 4-m shielded cable 3 m long. PWS: 39/2014
Technical Specifications in PDF
| Rated load (RL): 15, 30, 50, 75, 100, 150, 200, 250, 300, 500, 750, 1000, 1500 Kg |
| Combined error: < ±0.017 % RO |
| Repeatability: < ±0.015 % RO |
| Creep (20 minutes): ±0.016 % RO |
| Safe overload: 150 % RL |
| Ultimate overload: 200 % RL |
| Accuracy class: 3000 OIML |
| Deflection: 0.2 ÷ 0.4 mm |
| Compensated Temperature: -10 ÷ +40°C |
| Temperature range: -20 ÷ +50°C |
| Temperature effect on zero balance: < ±0.01 % RO/5°K |
| Temperature effect on output: < ±0.006 % RO/5°K |
| Rated output RO: 2 mV/V ±0.1 % |
| Zero balance: < ±2 % RO |
| Insulation resistance: > 5000 MOhm |
| Input resistance: 400 ± 20 Ohm |
| Output resistance: 350 ±3 Ohm |
| Recommended input: 5 ÷ 15 Vdc/Vac |
| Degree of protection: IP68 - IP69K |
deutsch
français
español
italiano
हिन्दी
