The BLH NOBEL KIMD-1 load cell is easy to install and it needs no additional mounting accessories. The KIMD-1 cell is suitable for weighing big loads and has a movable load point. The load cell BLH NOBEL KIMD-1 is also available for extreme temperature from - 40 to + 100 °C. It can be also made in stainless steel if required. Moreover, versions of the same load cell are available with ATEX certificate for the usage in explosive areas.
Technical Specifications in PDF
| Rated load RL: 500, 800 kN |
| Combined error: ±0.1 % RO |
| Repeatability: 0.02 % RO |
| Creep (30 minutes): ±0.03 % RL |
| Safe overload: 50 % RL |
| Ultimate overload: 100 % RL |
| Material: Yellow chromate steel |
| Degree of protection: IP67 |
| Temperature range: -40 ÷ +80 (+100 optional) °C |
| Temperature effect on zero balance: ±0.003 % RO/°C |
| Temperature effect on output: ±0.003 % of output/°C |
| Rated output RO: 2.040 mV/V ± 0.25% |
| Zero balance: ±2 % RO |
| Insulation resistance: > 4 G Ohm |
| Input resistance: 350 ± 5 Ohm |
| Output resistance: 350 ±0.5 Ohm |
| Recommended input: 10 Vdc/ac |
| Maximum supply voltage: 18 Vdc/ac |
| Tolerance of shunt calibration values: ±0.25 % |
deutsch
français
español
italiano
हिन्दी
