The Model 1022 is a low proile single-point load cell designed for direct mounting in low cost weighing platforms. Its small physical size, combined with high accuracy and aluminum construction, makes this low cost load cell ideally suited for retail, bench and counting scales. Using Model 1022 load cells simpliies scale construction, which results in signiicant parts and labor savings. The Model 1022 is available in a range of capacities: from 3 to 150 kg, approved to OIML R60 (4000d); to 20 to 150 kg, approved to OIML R60 (6000d); to 3 to 100 kg, approved to NTEP (5000d, single). Environmental protection to IP66 is provided as standard. For hazardous environments, ATEX approved versions are available. PWS: 09/2019
Technical Specifications in PDF
| Rated Load (RL): 3, 5, 7, 10, 15, 20, 30, 35, 50, 100, 150, 200 kg |
| Ultimate overload: 300 % RL |
| Material: Aluminium |
| Degree of protection: IP66 |
| Accuracy class: C3, C4 |
| Compensated Temperature: -10 ÷ +40°C |
| Temperature range: -30 ÷ +70°C |
| Temperature effect on zero balance: ±0.0014 % (NTEP); ±0.010 % (Non Approved); ±0.0023 % (C3); ±0.0014 % (C4) RO/°C |
| Temperature effect on output: ±0.0010 % (NTEP); ±0.0030 % (Non Approved); ±0.0010 % (C3); ±0.00075 % (C4) RO/°C |
| Rated output RO: 2 mV/V |
| Zero balance: ±0.10 mV/V |
| Insulation resistance: > 2000 MOhm |
| Input impedance: 415±15 Ohm |
| Maximum input voltage: 15 Vdc or Vac rms |
| Nominal input voltage: 10 Vdc or Vac rms |
| Cable Lenght: 0.5 m |
| Load plan: 350x350 |
| Output impedance: 350±3 Ohm |
deutsch
français
español
italiano
हिन्दी
