The PERMOUNTING weighing module has a pin load cell (double shear beam operation) made of fully welded steel and a built-in mounting component. The PERMOUNTING weighing module is suitable for tension measurements and all weighing systems. PERMOUNTING offers maximum resistance to impacts and overloads and is insensitive to side loads. The PERMOUNTING cell is supplied with a 5 meter long cable with 6 conductors and a length of 5 mt. The load cell and the mounting component of the PERMOUNTING product cannot be sold separately, the weighing module must be purchased in full (see image). PWS: 07/2018
Technical Specifications in PDF
| Rated Load (RL): 5, 10, 20, 40, 60, 80, 100 t |
| Combined error: < ±0.1 % RO |
| Repeatability: < ±0.02 % RO |
| Creep (20 minutes): ±0.03 % RO |
| Safe overload: 150 % RL |
| Ultimate overload: 300 % RL |
| Material: Stainless steel |
| Degree of protection: IP68 |
| Deflection: 0.4 mm |
| Compensated Temperature: -10 ÷ +50 °C |
| Temperature range: -20 ÷ +70 °C |
| Temperature effect on zero balance: < ±0.005 % RO/°C |
| Temperature effect on output: < ±0.005 % on output/°C |
| Rated output RO: 1 mV/V ±0.1 % |
| Zero balance: < ±2 % RO |
| Insulation resistance: > 5000 MOhm |
| Input resistance: 700 ±20 Ohm |
| Output resistance: 700 ±10 Ohm |
| Recommended input: 5 ÷ 15 Vdc/ac |
deutsch
français
español
italiano
हिन्दी
