The Model 240 is speciically designed to be used where the fast acquisition of a stable load signal is paramount. The Model 240’s unique fluid damping system allows the load cell to be used in applications that previously required the use of LVDT’s or similar measuring devices. The Model 240 brings load cell adaptability into check weighing and grading applications. Approved to OIML R60 and NTEP standards, sealed to IP66 level and available in coated steel or stainless steel, the Model 240 is suitable for most wash-down applications. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. PWS: 09/2019
Technical Specifications in PDF
| Rated Load (RL): 2, 3, 5, 7, 10, 15, 20, 30, 50 kg |
| Ultimate overload: 300 % RL |
| Material: Painted mild steel |
| Degree of protection: IP66 |
| Accuracy class: C3 |
| Compensated Temperature: -10 ÷ +40°C |
| Temperature range: -30 ÷ +70°C |
| Temperature effect on zero balance: ±0.0026 % (NTEP); NA (Non Approved); ±0.0026 % (C3) RO/°C |
| Temperature effect on output: ±0.0010 % (NTEP); NA (Non Approved); ±0.0010 % (C3) RO/°C |
| Rated output RO: 2 mV/V |
| Zero balance: ±0.10 mV/V |
| Insulation resistance: > 1000 MOhm |
| Input impedance: 415±15 Ohm |
| Maximum input voltage: 15 Vdc or Vac rms |
| Nominal input voltage: 10 Vdc or Vac rms |
| Cable Lenght: To suit m |
| Output impedance: 350±3 Ohm |
deutsch
français
español
italiano
हिन्दी
