The PTS shear beam load cell, made of stainless steel, has excellent precision and linearity and it is resistant to lateral loads exceeding 50% of the rated load (RL). The PTS cell has been designed for weighing tanks, hoppers, belts, platforms, single-cell systems, suspended loads and automatic packaging machines and is usually used in the food, chemical, pharmaceutical, plastic and metallurgical sectors. The PTS shear beam load cell has a 6-meter shielded 4-conductor cable. PWS: 11/2017
Technical Specifications in PDF
| Rated Load (RL): 0.5, 1, 2, 5 t |
| Combined error: ±0.023 % RO |
| Repeatability: ±0.01 % RO |
| Creep (30 minutes): ±0.02 % RO |
| Safe overload: 150 % RL |
| Ultimate overload: 300 % RL |
| Clamping force without any load: M12= 75Nm; M18= 500Nm |
| Material: Stainless steel |
| Degree of protection: IP67 |
| Accuracy class: 3000 OIML |
| Deflection: 0.2 ÷ 1.4 mm |
| Compensated Temperature: -10 ÷ +40°C |
| Temperature range: -35 ÷ +65°C |
| Temperature effect on zero balance: ±0.018 % RO/10°C |
| Temperature effect on output: ±0.014 % on output/10°C |
| Rated output RO: 3 mV/V ± 0.008 |
| Zero balance: ±1 % RO |
| Insulation resistance: > 5000 MOhm |
| Input resistance: 350 ±3.5 Ohm |
| Output resistance: 350 ±3.5 Ohm |
| Recommended input: 5 ÷ 12 Vdc/ca |
deutsch
français
español
italiano
हिन्दी
