The DAT 400 PBL weight transmitter is an innovative and exclusive product by Pavone Sistemi that can be customized. Among its features, there are the upload and download function for programming with TESTER 1008, 32 addressable units that are connectable to PC or PLC, linearization on 10 points and configuration and calibration from the front panel or PC via the USB serial port. It has a peak hold function for dynamic measures and screw terminal blocks. PWS: 31/2015
Technical Specifications in PDF
Measuring range: -0.5÷+3..5 mV/V (-3.9÷+3.9 mV/V optional) |
Input sensitivity: 0.02 µV/count |
Full scale non-Linearity: <0.01% |
Gain drift: <0.001% FS/°C |
Display: 6 digit, red LED (7 segments), h 14 mm |
A/D Converter: 24 bit |
Internal Resolution: > 16.000.000 points |
Trasducer input voltage: 5 V (max 6 load cells 350 Ohm) |
Visible resolution (in divisions): 60000 |
Decimal figures range: 0 ÷ 3 |
Temperature range: -10 ÷ +50°C (max umidity 85% without condensation) |
Storage temperature: -20 ÷ +70°C |
Filter: 0.1 ÷ 25 Hz |
Logic output: 2 Solid-state relays, (maximum load 24 Vdc / 100 mA each) |
Logic input: 2 optoisolated 24 V c.c. PNP (External voltage) |
Serial port: USB, RS232C or RS422/RS485 with ASCII or Modbus RTU protocols |
Power supply: 230 Vac 50 Hz - power 5 W |
Regulatory compliance: EN50081-1, EN50082-2 for EMC; EN61010-1 for Electrical security |
Baud rate: 2400, 9600, 19200, 38400, 115200 adjustable |
Transmission distance: 15m (RS232C), 1000m (RS422; RS485) |
Fieldbus: Profibus, Devicenet, Ethernet, Profinet, CANopen, Modbus-Plus, Precise Gateway 3000 |
Dimensions and weight: 298x260x140 (LxHxD) |