Weight Transmitter DAT 1400 Ethernet

DAT 1400 Ethernet

The DAT 1400 Ethernet weight transmitter has a mechanical keyboard and removable screw terminal blocks. DAT 1400 Ethernet is a completely customizable product. Among the various options that can be added there are: the connection (RS485 and power supply) to external smart junction box, the DATALOGGER function and the web-server software, which allows you to check the operating status of the instrument and to regulate other parameters even remotely. Moreover, DAT 1400 Ethernet has a Peak Hold function for dynamic measures. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run. PWS: 06/2018

Further Information

Technical Specifications in PDF

Watch our tutorial

Product code: PSDA1435

Technical Specifications

Measuring range: -3.9 ÷ +3.9 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01%
Gain drift: < 0.001% FS/°C
Display: 6 digit, 7-segment LED red, height 14mm
A/D Converter: 24 bit
Internal Resolution: > 16.000.000 points
Trasducer input voltage: 5 Vdc (max 8 -350 Ohm- load cells)
Frequency signal acquisition: 12 ÷ 1000 Hz
Visible resolution (in divisions): 999999
Divisions value (adjustable): x1, x2, x5, x10, x20, x50
Decimal figures range: 0 ÷ 4
Temperature range: -10 ÷ + 50 ° C (humidity max 85% no condensation)
Storage temperature: -20 ÷ +70°C
Filter: 0.5 ÷ 1000 Hz
Logic output: 2 opto-isolated; MAX 24 Vdc/100 mA each
Logic input: 2 opto-isolated 24 Vdc PNP (external power supply)
Serial port: 1 USB device + 1 RS232C + 1 RS485/Fieldbus; ASCII or Modbus RTU protocol
Analog output Non-Linearity: < 0,02%
Temperature drift analog output: 0,001% FS / °C
Power supply: 12-24 Vdc ±15% - Power consumption 5 W
Microcontroller: ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard from USB
Data storage: 64 Kbytes expandable up to 1024 Kbytes
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety

Certifications

  • UL
  • EAC

Related products

Tutorial 1 / 3

Tutorial 2 / 3

Tutorial 3 / 3