The weight indicator PSVIS HE 60 has an input for load cells, a 6-character numerical display, a stainless steel container and watertight connections. The configuration and calibration are set up by radio control. PWS: 41/2014
Technical Specifications in PDF
| Measuring range: -1.5 mV/V ÷ +3.5 mV/V |
| Full scale non-Linearity: <0.01% |
| Display: numerical to 6 digit to high efficiency and wide visual angle |
| Internal Resolution: 24 bit |
| Material: Stainless steel protected against dust |
| Frequency signal acquisition: 6 ÷ 25 Hz |
| Visible resolution (in divisions): > 60.000 |
| Decimal figures range: 0 ÷ 3 |
| Temperature range: -10°C ÷ +40°C (max humidity 85% without condesation) |
| Storage temperature: -20 ÷ +50°C |
| Filter: 0.2 Hz ÷ 25 Hz |
| Excitation voltage: 5 Vdc/120mA (max 350 Ohm 8 cells in parallel) short circuit protected |
| Logic output: 3 outputs |
| Serial port: RS232C/RS485; Ethernet (optional), Profibus (optional) |
| Power supply: 230 - Opz. 115 Vac 50/60 Hz - max absorption 15 VA |
| Regulatory compliance: EN61000-6-2, EN61000-6-3, EN61010-1 |
| Dimensions: 346 mm x 118 mm x 98 mm (l x h x p) |
| Reading distance: up to 15 m |
| Temperature drift (analog input): < 0.001 % FS/C° |
| Temperature drift (load cell): < 0.0003 % FS/°C |
deutsch
français
español
italiano
हिन्दी
