Pavone Weighing Systems has been supplying the paint industry with several industrial weighing solutions for more than 40 years. Our load cells, assembly accessories, weight transmitters, weight indicators, and weighing and dosing systems adapt to the customer's needs and guarantee precision and reliability.
The BLH NOBEL KIS 1 load cell is extremely precise and robust and it is resistant to very high lateral forces. The KIS 1 cell is easy to install and has a moveble loading point and a 10 meter 4-wire shielded cable. KIS 1 load cell has a wide range of application: large silos and scrap baskets, reactors and mixers, conveyor belts and high capacity force measurement systems. KIS 1 load cell is also available in ATEX version certified for use in explosive atmospheres.
The BLH NOBEL KIS 2 load cell is extremely precise and robust and it is resistant to very high lateral forces. The KIS 2 cell is easy to install, it has a moveble loading point and 5 meter 4-wire shielded cable. The BH NOBEL KIS 2 load cell can be used for weighing for dosing, mixing and melting systems, for weighing for reactors and conveyor belts, for complex weighing processes and for accurate force misalignment systems.
The SBR shear beam load cell, made of stainless steel and hermetically sealed, has been designed for the fiscal weighing of low-profile hoppers, tanks, belts and platforms, is 100% resistant to side loads and has a 6-conductor shielded cable 5 meters long. Furthermore, the MH MOUNTING KIT mounting accessory is available for this load cell and allows an easy assembly and installation. Also available in nickel-plated steel (SBRA model).
The 65023 shear beam load cell, made of nickel-plated steel and stainless steel, has watertight protection for use in harsh environmental conditions, excellent linearity and precision characteristics and is resistant to 100% side loads. The 65023 shear beam load cell was designed for weighing hoppers and tanks and for the construction of low-profile platforms. The 65023 shear load cell is also available in a special high temperature version. In addition, there are mounting accessories available to facilitate the cell installation: MKX and MH MOUNTING KIT.
The DAT 1400 weight transmitter has a mechanical keyboard, removable screw terminal blocks and a peak hold function for dynamic measures. It has the ability to integrate different options based on customer needs. For example, among the options there are the analog input which can be in tension or electrical and the RS485 connection to external smart junction box. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.
The UWT 6008 weight transmitter comes from the Pavone Systems experience. It is a unique product in the weight transmitter family and is ideal for all industrial applications where it is necessary to know the load distribution on the different cells. It is able to monitor all load cells and generate alarms due to excessive cell signal drift, missing connections, failure of one of the cells, unbalanced weight distribution. The emulative control allows the continuity of work of the weighing system even in case of failure on one of the load cells, up to the replacement of the same. The Software Optimation is given for free. This Software allows you to run certain activities such as calibration or monitoring directly from your computer. The Optimation software is provided by Pavone Systems and guarantees a perfect instrument run.
The Tester 1008, unique in its kind, is used to check the distribution of the load among the load cells, thus avoiding overloads or unbalances that may be harmful both for the load cells and for the precision of the measurement. Our diagnostic calibrator Tester 1008 allows you to verify the exact calibration of the four-cell systems in a short time with a simple and practical connection to the junction box, thus guaranteeing a huge time saving. In addition to that, Tester 1008 also allows you to perform the instrumental calibration of weight indicators and weight transmitters. The Tester 1008 is equipped with a monochrome touch screen display, touch keyboard, power button and ABS handheld case. The Tester 1008 can be used with cells with power supply voltage from 3 Vdc to 15 Vdc, both positive and positive and negative, with input impedance > 100 kohm.
Do you work in the paint industry?
Our technical team is at your disposal so as to help you choose among our industrial electronic weighing systems.
Solutions since 1963
Pavone Weighing Systems produces electronic components for the main industrial sectors of weighing and measurement.