Tedea load cell 1252


The Model 1252 is a high capacity single-point load cell fully interchangeable with the Model 1250, designed for direct mounting of the weighing platform or side cell applications. Resulting from simpler scale construction, the Model 1252 is a cost-effective load cell for use in counting, weighing, bench or loor scale productions. A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. This load cell has Factory Mutual approval and IP66 protection. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of change in the lead wires resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics PWS: 09/2019

Further Information

Technical Specifications in PDF

Product code: -_-


Technical Specifications

Rated Load (RL): 75, 100, 150, 200, 300, 500, 635 kg
Ultimate overload: 300 % RL
Material: Plated (anodized) aluminium
Degree of protection: IP65
Accuracy class: C3
Compensated Temperature: -10 ÷ +40°C
Temperature range: -30 ÷ +70°C
Temperature effect on zero balance: ±0.010 % (Non Approved); ±0.004 % (C3) RO/°C
Temperature effect on output: ±0.0030 % (Non Approved); ±0.0010 % (C3) RO/°C
Rated output RO: 2 mV/V
Zero balance: ±0.20 mV/V
Insulation resistance: > 2000 MOhm
Input impedance: 415±15 Ohm
Maximum input voltage: 15 Vdc or Vac rms
Nominal input voltage: 10 Vdc or Vac rms
Cable Lenght: 3 m
Load plan: 600x600
Output impedance: 350±3 Ohm


  • ATEX
  • OIML
  • FM
  • IECEx

Related products