Weight Transmitter I-BOX 2000

I-BOX 2000

The I-BOX 2000 weight transmitter is the effective economic alternative to digital load cells: it replaces the analog junction cards, it simplifies installation and it speeds up the system calibration. The I-BOX 2000 weight transmitter replaces the analog junction cards and it allows the continuous monitoring of the individual load cells. I-BOX 2000 weight transmitter is ideal for weighing systems on strain gage load cells, it also provides weight and output signal of each individual cell to correct weight distributions on the cells. Moreover, a dedicated PC software allows you to program operating parameters, to monitor each individual channel and to display the weight values. PWS: 31/2015

Further Information

Technical Specifications in PDF

Product code: -_-


Technical Specifications

Measuring range: -0.5 ÷ +3..5 mV/V (-3.9 ÷ +3.9 mV/V optional)
Input sensitivity: 0.03 µV/count
Full scale non-Linearity: < 0.01%
Gain drift: <0.0003% FS/°C
A/D Converter: 24 bit
Internal Resolution: > 16.000.000 points
Trasducer input voltage: 5 V (max 6 load cells 350 Ohm)
Temperature range: -10 ÷ +50 °C
Serial port: COM1: RS232 (until 15m) COM2: RS485 (until 1000m)
Power supply: 12÷24 Vcc or 5 Vcc on demand
Regulatory compliance: EN 61000-6-3, EN 61000-6-2
Dimensions: Sheet: 128 x 72 x 20 (L x W x D) - ABS case: 200 x 150 x 75 (L x W x D) - metal enclosure: 160 x 160 x 90 (L x W x D)
Number of readings per second: 0.1 ÷ 72 depending on the number of active channels and digital filter


  • EAC

Related products