Weight Transmitter A.D. SYSTEM


A.D. SYSTEM (Advances Digital System) is a weight transmitter that allows the digital management of analog load cells. The A.D weight transmitter System consists of two elements: the special juction box and the reading tool. Moreover, the weight transmitter A.D. SYSTEM has 4 membrane keys. PWS: 06/2014

Further Information

Technical Specifications in PDF

Product code: -_-

Technical Specifications

Measuring range: -1.0 ÷ +3.5 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: ±0.01%
Gain drift: ± 0.001% F.S./°C
Display: LCD, alphanumeric
A/D Converter: 24 bit
Trasducer input voltage: 5 V
Temperature range: -10 ÷ +50 °C
Storage temperature: -20 ÷ +70 °C
Filter: 0.1 ÷ 25 Hz
Logic output: 2 relays (dry contacts NA) -115 Vac/30 Vdc 0.5 A
Logic input: 2 opto-isolated 24 Vdc PNP
Serial port: RS232 or RS422/RS485
Analog optional output: optically isolated 16-bit. Voltage: 0 to 5/10V (R min10 K Ohm). Current: 0/4 to 20mA (R max 300 Ohm)
Power supply: 24 Vdc ±15% - Power consumption 10W
Regulatory compliance: EN61000-6-2, EN61000-6-3
Conversion speed: from 6 to 12 updates per second on each cell (depends on the number of cells)
Fieldbus: ASCII, Modbus RTU, + optional Profibus, Devicenet, Ethernet
Baud rate: 1200 ÷ 115200
Transmission distance: 15m (RS232C), 1000m (RS422; RS485)
Calibration: with test certificates, sample table


  • EAC