The TRP traction load cell (also known as tension or S-beam type), made of stainless steel, is ideal for tensile and compressive force measurements. The TRP tension cell has an overload resistance higher than 300% and disposes of a 5-meter shielded 4-conductor cable. PWS: 11/2017
Technical Specifications in PDF
| Rated load (RL): 2, 5, 10, 15, 25, 50 Kg |
| Combined error: ±0.05 % RL |
| Repeatability: ±0.02 % RL |
| Creep (20 minutes): ±0.03 % RL |
| Safe overload: 150 % RL |
| Ultimate overload: > 300 % RL |
| Ultimate sideload: 300 % RL |
| Material: Stainless steel |
| Degree of protection: IP65 |
| Deflection: 0.4 mm |
| Compensated Temperature: -10 ÷ +50°C |
| Temperature range: -20 ÷ +70°C |
| Temperature effect on zero balance: ±0.005 % RO/°C |
| Temperature effect on output: ±0.005 % output/°C |
| Rated output RO: 2.0 mV/V ±0.1 % |
| Zero balance: ±1 % RO |
| Insulation resistance: > 5000 MOhm |
| Input resistance: 350 ±10 Ohm |
| Output resistance: 350 ±10 Ohm |
| Power supply: 2 ÷ 15 Vdc/ac |
| Recommended input: 5 ÷ 15 Vdc/ac |
deutsch
français
español
italiano
हिन्दी
