The compression load cell 220 has been designed to operate in difficult and dangerous environments and it is suitable for weighing hoppers, tanks, silos and trucks. The load cell 220 is made of stainless steel and has a maximum capacity of 50 tons. The compression load cell 220 is used in industrial weighing and one of its strength is the easy installation. PWS: 20/2012
Technical Specifications in PDF
| Rated Load (RL): 5, 10, 20, 30, 50 t |
| Combined error: 0.02 % RO |
| Repeatability: ±0.01 % RO |
| Creep (30 minutes): ±0.0170% on applied load |
| Safe overload: 150 % RL |
| Ultimate overload: 300 % RL |
| Material: Stainless steel |
| Degree of protection: IP68 |
| Accuracy class: 3000 OIML, NTEP |
| Compensated Temperature: -10 ÷ +40 °C |
| Temperature range: -30 ÷ +70 °C |
| Temperature effect on zero balance: 0.0010 % RO/°C |
| Temperature effect on output: 0.0010 % on output/°C |
| Rated output RO: 2 mV/V ± 0.1% |
| Zero balance: ±2 % RO |
| Insulation resistance: > 2000 M Ohm |
| Input resistance: 1065 ±60 Ohm |
| Output resistance: 1025 ±20 Ohm |
| Recommended input: 5 ÷ 15 Vdc/ac |
| Maximum supply voltage: 20 Vdc/ac |
| Y = Emax/Vmin: 14000 |
| Max number of intervals: 3000 |
| Cable Lenght: 5m (5t), 10m (10 & 20t), 20m (30 & 50t) |
deutsch
français
español
italiano
हिन्दी
